Nothing is more annoying than finding a dent in your brand-new car. Even if you drive carefully, you might sometimes not escape things like falling pine cones, improperly parked cars, or pebbles that impact your car on the road. Many of us would never think about mending dents because having them professionally removed might be really expensive.
Dents, particularly minor ones, are not, however, worth losing sleep over. You may get rid of them from your car in a number of ways by using regular household goods like a plunger, vacuum cleaner, or aluminum foil. You should choose the approach that would be appropriate for your car because not all of the techniques would be effective for you.
1. Use a hair dryer to remove a dent
Find and quantify the dent. Locate the following common items: a hair dryer, aluminum foil, a package of dry ice, rubber-coated gloves, and a can of compressed air. The hair dryer should be held around 6 inches away from the surface of your car in order to heat the dent. Wrap a piece of aluminum foil around the dent. Put on the gloves with the rubber coating to shield your hands from any harm. The metal foil covering the dent should be rubbed with dry ice. With the compressed air that has been liquefied, you can also cool the dented area. The dent will most likely burst out after the first minute because to the sudden temperature shift.
2. Utilize a plunger.
The magic instrument is the plunger. It can be used for a variety of different things in addition to unclogging toilets. A plunger can quickly remove a dent if it is not too large. Simply pour some water over the plunger and the dent to remove them. Start advancing and retracting the plunger. This should be done several times until the dent pops out.
3. Boiling water can be used to repair a dented bumper.
This technique can be used to fix dents on plastic bumpers and other plastic-based automotive components. Pour boiling water over the dented area of your bumper. Pop the ding out by reaching behind the bumper. In the event that the dent cannot be repaired, you might also need to remove the bumper. Finally, spray the bumper with a pot of ice water to chill and repair the plastic region.
4. Use a bucket and a vacuum cleaner.
Create a tiny hole in the bucket’s base. The top of the bucket should be used to cover the dent. Turn on the vacuum cleaner, position the vacuum cleaner tube over the hole at the bottom of the bucket, and wait for the dent to emerge.
5. Elicit a suction. You may create a fantastic suction device out of a pot, bucket, and vacuum cleaner if the dent is in a hard-to-reach place or not on the plastic bumper. Surprise! Even more commonplace products have tons of entertaining alternate applications. Make sure that the bucket or pot has a hole in the bottom, and then use tape to secure it to the dented part of your car. Place the vacuum cleaner over the dent, and it should quickly remove the dent from your automobile!